汽车烤漆房生产厂家 | 燃油烤漆房 | 工业烤漆房 | 负压型喷漆房 | 正压型喷漆房 | 打磨房 |
当前位置:强立首页  > 所有产品  > 废气处理系统  > 查看详情
QL-G4 光氧+活性炭吸附处理

QL-G4 光氧+活性炭吸附处理

购买价格:0.00
点击次数:87
发布时间:2023-12-18 14:23:43
描述
 
0L-G4 光氧+活性炭吸附处理 配置参数

Configuration parameters for photo oxygentactivated carbon adsorption treatment

 
结构
Structure

立式,尺寸L2800*W1250*H2570mm碳钢喷塑。

Vertical, size L2800 * W1250 * H2570mm carbon steel spray molding.
治理风量
Control air volume
15000~20000m3/h
集尘过滤柜
Dust collection andfiltration cabinet

前处理过滤:
加大型机柜延长耗材更换周期
滤材过滤级别:三级
第一道: 玻璃纤维棉过滤,铺设在房内钢格栅下部
第二道:G1板式过滤器,铺设在环保柜内最下部。
第三道: G3布袋型625x1110的5个,铺设在环保柜内第二道
玻璃纤维棉过滤:
集尘过滤柜Dust collection andfiltration cabinet
设计风速1.5m/s,最终风阻130Pa,初始过滤效率80.5%(计重法) 地板格栅及过滤棉,容尘量360g/m2,耐温(恒温)100°G1板式过滤棉:设计风速1.5m/5,初阳力12pa,最终风阳200Pa,初始过滤效率75%容量400a/m2,耐温(恒温)100°G3布袋型:设计风速1.5m/5,初阻力20pa,最终风阻250Pa,初始过滤效率91%容量526g/m?,耐温(恒温)100°。

Pre processing filtration:
Enlarge the cabinet to extend the replacement cycle of consumables
Filter material filtration level: Level 3
First step: Glass fiber cotton filtration, laid under the steel grating in the room
The second laver: G1 plate filter, laid at the bottom of the environmental protection cabinet
The third laver: 5 pieces of G3 bag type 625x1110, laid in the environmental protection cabinet. The second laveiGlass fiber cotton filtration:
Design wind speed of 1.5m/s, final wind resistance of 130Pa, initial fltration eficiency of 80.5% (weight method), oor grlle and filter cotton, dusicapacity of 360g/m 2,Temperature resistance (constant temperature) 100℃
G1 plate flter cotton: design wind speed 1.5m/s, nital resistance 12pa, final wind resistance 200Pa, initial fltration eficiency 75%, dust capacity400g/m 2, Temperature resistance (constant temperature) 100 ℃
G3 bag type: design wind speed 1.5m/s, nital resistance 20pa, final wind resistance 250Pa, nital fltration eficiency 91%, dust capacity 526g/m 2Temperature resistance (constant temperature) 100 ℃
光氧发生器Photooxygen generator
253.7纳米波段UV管10支,185纳米波段UV管10支,每支功率150w,合计功率3kw,配套优质整流器带过热保护装置。催化剂采用蜂窝状金属网孔全方位与光源接触,惰性催化剂在338纳米光源以下发生催化反应。

253.7 nanometer band UV tube and 10 185 nanometer band UV tubes, each with a power of 15w and a total power of 3kw. ecuipped with hich-ualitrectifiers and overheating protection devices. The catalyst uses honeycomb shaped metal mesh in ful contact with the lioht source, and the inert catalystundergoes catalytic reactions below the 338 nanometer light source.
活性炭柜Activated carbon cabinet
层活性炭140块,碘值600以上的蜂窝活性炭吸附
主要作用:具有比表面积大,微孔发达,高吸附容量,使用寿命长,废气中的污染物被吸附,从而起到净化作用。

Alayer of 140 activated carbon is adsorbed by honeycomb activated carbon with an iodine value of 600 or more.
Main function: t has a large specific surface area, developed micropores, high adsorption capacity, long service ife, and the pollutants in the exhaust gasare adsorbed, thereby playing a purification role.
排风机
Fan

配YDW系列5.6C/11KW排风机,最高风量26000m3/h,最高全压820pa。

Equipped with YDW series 5.6C/11KW exhaust fan, with a maximum air volume of 26000m3/h and a maximum total pressure of 820pa.
推荐